back

The Design Decisions behind the first Open-Everything FABulous FPGA

If you suspend your transcription on amara.org, please add a timestamp below to indicate how far you progressed! This will help others to resume your work!

Please do not press “publish” on amara.org to save your progress, use “save draft” instead. Only press “publish” when you're done with quality control.

Video duration
00:41:04
Language
English
Abstract
With the availability of robust silicon-proven open-source tools, IPs, and process design kits (PDKs), it is now possible to build complex chips without industry tools. This is exactly what we did to design our first open-everything FABulous FPGA, which is an example of open silicon that is designed and programmed entirely with open tools.



Produced in the Skywater 130nm process node, our chip features 672 LUTs (each with 4 inputs and a flop), 6 DSP blocks (8x8 bit multipliers with 20-bit accumulators), 8 BRAMs (with 1KB each), and 12 register file primitives (each having 32 4-bit words with 1 write and 2 read ports). The resources are sufficient to run, for instance, a small RISC-V system on the fabric. The FPGA comes with a small board that is designed to fit into an audio cassette case and that can be programmed directly via an USB interface. Moreover, the FPGA supports partial reconfiguration, which allows us to swap the logic of parts of the FPGA while continuing operation in the rest of the chip.



The chip was designed with the help of the versatile FABulous framework, which integrates several further open-source projects, including Yosys, nextpnr, the Verilator, OpenRAM, and the OpenLane tool suite. FABulous was used for various embedded FPGAs, including multiple designs manufactured in the TSMC 28nm process node.



The talk will discuss and analyze differences and similarities with industry FPGAs and dive into design decision taken and optimizations applied to deliver good quality of results (with respect to area cost and performance). The talk will highlight state-of-the-art in open-source FPGA chip design and provide a deeper than usual discussion on the design principles of these devices.

The talk will target both FPGA novices and experts and discuss the technology from two angles: 1) the capabilities of open tools to build an entire FPGA ecosystem and 2) FPGA technology insights.

Talk ID
38c3-586
Event:
38c3
Day
3
Room
Saal GLITCH
Start
2:45 p.m.
Duration
00:40:00
Track
Hardware & Making
Type of
other
Speaker
Dirk
Talk Slug & media link
38c3-the-design-decisions-behind-the-first-open-everything-fabulous-fpga
English
0.0% Checking done0.0%
0.0% Syncing done0.0%
0.0% Transcribing done0.0%
100.0% Nothing done yet100.0%

Work on this video on Amara!

English: Transcribed until

Last revision: 1 month, 1 week ago